Color plate packaging and packaging materials
October 21, 2022
Color plate packaging materials:
(1) Protective materials: wood, metal plates, fiberboards,
Plastic or other suitable material.
(2) Protective packaging materials: kraft paper, plain paper, vapor phase rust-proof paper, greaseproof paper and plastic film.
(3) Packaging Bundles: Narrow steel or steel wire.
(4) protective coating: a variety of preservatives or grease materials.
(5) Anti-deformation materials: angle guard iron, side guards, roll jacket, and reel cover.
Color plate packing method
After the color coated steel plate emerges from the cooling process after coating, the entire coating process is basically completed. The steel strip enters the coiling process through the exit section of the production line. Some color coating unit's outlet section has a vertical and horizontal shear function, so that the color coated steel product can be directly cut into strips or cut into the finished product packaging process. The task of the packaging is to bind the steel sheets stacked into a crucible and the steel strip wound into a coil to ensure the protection against damage, pollution or rust.
The packaging is in the form of plate-like packaging and roll-shaped packaging, and any strip steel that directly enters the fixed-length flying shearing process through the outlet section is a plate-shaped packaging. If you are directly reeling or entering a reel, it is a roll-like package. The finished product packaging is also part of the quality control of color coated steel. Because the quality of the packaging is not enough, the product will have quality problems in terms of corrosion and deformation, which will greatly affect the processing performance and performance of the product. Therefore, the packaging effect should be able to guarantee the product. Not loose, damp, deformed and damaged during transportation and storage. China has standard requirements for the packaging forms and methods of color-coated steel plates. The following describes several packaging methods for color-coated steel plates. Specific operations should be performed in accordance with national standards.
Roll packaging Roll packaging can be divided into vertical packaging and horizontal packaging according to the different positions of the rolling eyes. According to whether the configuration of the bracket can be divided into bracket packaging or no bracket packaging. The wooden bracket for the packaging depends on the diameter of the coil, and the bracket material must be thick. The packaging material is the same as the plate packaging. Take care to use more than one layer of protective packaging material. Some color-coated steel plate production lines are equipped with specialized packaging lines. This type of line has a large investment, covers a wide area, but has a high efficiency. It is generally arranged in a centralized manner and is used by multiple shearing units. It can be automatically packaged every 15 seconds. Volume. A packer can complete a 60-volume packaging task per hour, typically for a large color coated line.
Packaging preparation for plate packing In order to reduce the possibility of easy deformation of the boxed plate due to transportation and lifting, boxed steel plate packing should be made of wood or wooden brackets. The wood is divided into longitudinal and transverse wood, and the width of different steel plates is different. And length should be matched with the number of suitable mats
